Balmer Lawrie (UAE) -- By Industry [Lubricant & Greases]
   
 
   
For packing lubricants and greases, the following types of packages are available from Balmer Lawrie (UAE).
Metal Packaging
For Lubricants and Brake Fluids:
New and Reconditioned Tight Head Steel Drums of 210 litre capacity
Tinplate cans of 250 ml to 25 litre capacity. They are of following types.
 

Cylindrical (Round) cans of diameters from 65 mm to 228 mm. These cans could be supplied with
    a
one end seamed and the other open, to be seamed at the customer’s plant after filling, or
    a
both ends seamed and with a spout hole which, after filling, can be fitted with a Plastic Pull-up Spout
 

Rectangular (Oblong) cross-section cans in three cross-sections. In these cans typically both ends are seamed, and the top is fitted with
    a
a Tinplate Bridge Handle and a Metal Neck through which filling is done. A metal or plastic screw closure is used to seal the neck, or
    a
a Galvanised Wire or Plastics handle and a spout hole, which, after filling can be fitted with a Plastic Pull-up Spout
  Cylindrical Drums of upto 25 litre capacity, with a
    a
pail handle made of Galvanised Wire fitted to the body of the drum or
    a
Galvanised Wire or Plastics Handle fitted to the top,
And, either
    a
a metal neck through which filling is done and a metal innerseal and a screw cap fitted after filling, or
    a
a spout hole, which, after filling, can be closed with a Plastics Pull-up Spout.
 

Conical Pails (Conipails) of upto 25 litre capacity, with a crimp-on lug lid and optionally a Plastic Pull-up Spout.
For Greases:
New and Reconditioned Open Head drums of 200 litre capacity
Cylindrical (Round) Tinplate cans of diameters from 84 mm to 175 mm. These cans are seamed with an end at the bottom and a ring at the top. A loose lid is supplied which is fitted after filling the pack.
Conical Pails (Conipails) of upto 25 litre capacity, with a crimp-on lug lid.
Plastics Packaging
Blow Moulded HDPE packs of 250 ml to 10 litre capacity. These could either from moulds owned by Balmer Lawrie (UAE) of generic design packs or from customer owned moulds of customer’s own design. Plastics Closures are injection moulded from HDPE and may be fitted with customer supplied Induction-seal Wads.
New Steel Drums

Click to zoom

Rectangular Tinplate Cans for Lubricants

Click to zoom


Tinplate Cans for Lubricants

Click to zoom

Labelled Plastic Packs 4 and 5 litre capacities

Click to zoom

Screen Printed Plastic Packs_1 litre to 10 litre capacities

Click to zoom