Balmer Lawrie (UAE) -- By Industry [Paints, Coatings & Thinners]
   
 
   

For packing paints, coatings and thinners, the following types of packages are available from Balmer Lawrie (UAE). Depending on the nature of the contents to be filled, optionally the containers could be internally lacquer lined with either a single or a double coat of lacquer.

Metal Packaging
For Paints
Tinplate cans of 250 ml to 25 litre capacity. They are of following types.
  a
Cylindrical (Round) cans of diameters from 84 mm to 175 mm. These cans have the bottom end seamed and a ring seamed at the top. A loose lid is supplied which is fitted after filling the pack.
Depending on the pack size and weight of contents, either a galvanized wire or plastics strap handle could be fitted to the body of the can.
  a
Conical Pails (Conipails) of upto 25 litre capacity, with a crimp-on lug lid. A Galvanised wire handle is fitted to the body.
For Coatings
New Tight Head Steel Drums of 210 litre capacity
New Open Head drums of 200 litre capacity
Tinplate cans of 250 ml to 25 litre capacity. They are of following types.
  a
Cylindrical (Round) cans of diameters from 84 mm to 175 mm. These cans have the bottom end seamed and a ring seamed at the top. A loose lid is supplied which is fitted after filling the pack.
Depending on the pack size and weight of contents, either a galvanized wire or plastics strap handle could be fitted to the body of the can.
  a
Conical Pails (Conipails) of upto 25 litre capacity, with a crimp-on lug lid. A Galvanised wire handle is fitted to the body.
For Thinners and Solvents
New and Reconditioned Tight Head Steel Drums of 210 litre capacity
Tinplate cans of 250 ml to 25 litre capacity. They are of following types.
  a
Cylindrical (Round) cans of diameters from 65 mm to 105 mm, with both ends seamed and with a spout hole which, after filling, can be fitted with a Plastic Pull-up Spout
  a
Rectangular (Oblong) cross-section cans in three cross-sections. In these cans typically both ends are seamed, and the top is fitted with
    a
a Tinplate Bridge Handle and a Metal Neck through which filling is done. A metal or plastic screw closure is used to seal the neck, or
    a
a Galvanised Wire or Plastics handle and a spout hole, which, after filling can be fitted with a Plastic Pull-up Spout
  Cylindrical Drums of upto 25 litre capacity, with a
    a
pail handle made of Galvanised Wire fitted to the body of the drum or
    a Galvanised Wire or Plastics Handle fitted to the top,
And, either
    a
a metal neck through which filling is done and a metal innerseal and a screw cap fitted after filling, or
    a
a spout hole, which, after filling, can be closed with a Plastics Pull-up Spout.
Conical Tinplate Pails for Paints and Chemicals

Click to zoom

Round Tinplate Cans for Paints and Chemicals

Click to zoom

Tinplate Cans and Pails for Paints and Chemicals

Click to zoom

Tinplate Cans for Solvents and Thinners

Click to zoom

New Steel Drums

Click to zoom