Balmer Lawrie (UAE) -- By Industry [chemical]
   
 
   
For packing chemicals, the following types of containers are available from Balmer Lawrie (UAE).
Metal Packaging
Depending on the nature of the contents to be filled, optionally the containers could be internally lacquer lined with either a single or a double coat of lacquer.
New and Reconditioned Tight Head Steel Drums of 210 litre capacity
New and Reconditioned Open Head drums of 200 litre capacity
Tinplate cans of 250 ml to 25 litre capacity. They are of following types.
 
Cylindrical (Round) cans of diameters from 65 mm to 228 mm. These cans (subject to confirmation) could be supplied with
  a
both ends seamed and with a spout hole which, after filling, can be fitted with a Plastic Pull-up Spout
  a
bottom end seamed and a ring seamed at the top. A loose lid is supplied which is fitted after filling the pack.s
  Depending on the pack size and weight of contents, either a galvanized wire or plastics strap handle could be fitted to the body of the can.
 
Rectangular (Oblong) cross-section cans in three cross-sections. In these cans typically both ends are seamed, and the top is fitted with
    a
a Tinplate Bridge Handle and a Metal Neck through which filling is done. A metal or plastic screw closure is used to seal the neck, or
    a
a Galvanised Wire or Plastics handle and a spout hole, which, after filling can be fitted with a Plastic Pull-up Spout
 
Cylindrical Drums of upto 25 litre capacity, with a
    a
pail handle made of Galvanised Wire fitted to the body of the drum or
    a
Galvanised Wire or Plastics Handle fitted to the top,
And, either
    a
a metal neck through which filling is done and a metal innerseal and a screw cap fitted after filling, or
    a
a spout hole, which, after filling, can be closed with a Plastics Pull-up Spout.
 
Conical Pails (Conipails) of upto 25 litre capacity, with a crimp-on lug lid and optionally a Plastic Pull-up Spout.
Plastics Packaging
Blow Moulded HDPE packs of 250 ml to 10 litre capacity. These could either from moulds owned by Balmer Lawrie (UAE) of generic design packs or from customer owned moulds of customer’s own design. Plastics Closures are injection moulded from HDPE and may be fitted with customer supplied Induction-seal Wads.
New Steel Drums

Click to zoom


Conical Tinplate Pails for Paints and Chemicals

Click to zoom


Round Tinplate Cans for Paints and Chemicals

Click to zoom


Tinplate Cans and Pails for Paints and Chemicals

Click to zoom


Plastic Packs - Generic Designs

Click to zoom